HMS Downloader.EXE  

1. Download the file below and save it to your computer.

2. Select the com port (serial port) that you will be using for connection to the C16/C8 series boards.  The baud rate is 38400 for C16/C8 boards.

3. Connect your computer to the HMS RS232-TTL board.

4. Connect the RS232-TTL board to the C16/C8 board. (Use the stereo cable supplied with the RS232-TTL board).

5. Set the C16/C8 board to receive the file that you want to send it. (Firmware upgrade or Daughter Board Upgrade).
    Note: Rev 4 Firmware has a 'download command'.  This command is available with the latest 'HMSDownloader.exe'.
    Note: Only send binary files to the C16/C8 board (*.bin). 
    Note: If Daughter Board Upgrade then the daughter board has to be put in 'Upgrade' mode as well. 

6. Run the program

7. Select the file that you want to send.  (Navigate to the directory where you saved the binary file that you will use to upgrade the board)

The transfer of the file to the C16/C8 board is automatic.  You will see a progression of 'pages sent' on the Upgrade Program window.

HMSDownloader.exe  (34 K bytes)

Note: Custom software available to meet your special requirements.

Updated: January 07, 2012